Ballasts
Electronic (EDC) and conventional ballasts like. Vossloh Schwabe for NDL (high-pressure sodium lamps) and MH (metal halide bulbs) in lighting systems. A ballast is required to operate a gas discharge lamp (ndl / mh) is required.
The ballast is connected in series to the lamp and switched on the lamp must be fit, because with the mains frequency of 50 Hz or 60 to the power of the lamp at its nominal value is limited. For lamps, the igniter is required (for example sodium vapor lamps and metal halide lamps), whose Zündstromkreis is additionally connected in series to the lamp.
Conventional ballasts due to their inductance cause a blank in the electricity network. Therefore, we recommend starting from 7 high-pressure sodium lamps throttle lock. A throttle lock is needed to the frequencies by the ballast back into the electricity grid will be filtered and therefore unwanted attention from the electricity supplier to prevent.
The ballast is connected in series to the lamp and switched on the lamp must be fit, because with the mains frequency of 50 Hz or 60 to the power of the lamp at its nominal value is limited. For lamps, the igniter is required (for example sodium vapor lamps and metal halide lamps), whose Zündstromkreis is additionally connected in series to the lamp.
Conventional ballasts due to their inductance cause a blank in the electricity network. Therefore, we recommend starting from 7 high-pressure sodium lamps throttle lock. A throttle lock is needed to the frequencies by the ballast back into the electricity grid will be filtered and therefore unwanted attention from the electricity supplier to prevent.
Anzeige-Optionen:
- « zurück
- Seite:
- 1
- weiter »
Artikelübersicht - Seite 1 von 1
Seiten-Navigation
- « zurück
- Seite:
- 1
- weiter »
